Installation of Mitsubishi Electric air conditioning and heating
system for solar panel cutting bed chamber.
Orion
air conditioning & refrigeration ltd is pleased to complete the
installation of a Mitsubishi Electric
Air Conditioning PEAD ducted system and fresh air make up system to
class 1000 clean room standard. The chamber housed a solar panel laser
cutting bed designed to make the manufacture of cells to high
tolerances. The Mitsubishi Electric
Air Conditioning indoor ducted system was coupled to a class 1000 HEPA
filter and paper pre-filter housed in a purpose built filter housing box
with flow and return 200mm spigots. To create a positive pressure in the
room the filter box had a centrifugal fan inlet.
About
M-solv Limited
M-Solv is a global company
formed to advance laser micromachining and micro deposition
applications. M-Solv performs application specific process research,
design, engineering and manufacture for micron scale ablative
machining and other specialised functional materials processes.
Dedicated to the
promotion of environmentally friendly manufacturing processes, the dry
laser etching techniques used by M-Solv are set to replace the
incumbent wet chemical processes currently used in electronics
manufacture. M-Solv’s range of applications target areas
where laser processing will be incorporated for economic and
environmental reasons. These sectors include Photovoltaic,
Microelectronics and Flat Panel Display manufacture.
Test Chamber Air
Conditioning Criteria
M-Solv required that the chamber
air conditioning system had a tight linier temperature control (close
control air conditioning format) with a
maximum temperature deviation of +/- 1 DegC. The machine tool within the
chamber produced 2kW of heat output loss and the chamber area was only 20
Meters cubed and realistically wouldn't require a large capacity air
conditioning unit. The turnover of air in the room and ease of
temperature control were important so a 10kW
Mitsubishi Electric PEAD-RP100JAQ (10KW)
was installed for a high room air turnover and linier close temperature
control. Though oversized cooling capacity wise the unit held the temperature
within the requested bandwidth and the made to measure filtration system kept the room
to class 10000 clean room standard.
M-Solv Special Air
Conditioning Project Gallery
For assistance on special projects
please contact:
Call: +44(0)845 5677080
E-mail:
[email protected]
|