Phoenix Inverters: 180VA – 750 VA 230V/50Hz and
Developed for professional duty, the Phoenix
range of inverters is suitable for the applications. The design criteria
have been to produce a true sine wave inverter with optimized efficiency but
without compromise in performance. Employing hybrid HF technology, the
result is a problem-free, to any load.
Extra start-up power
A unique feature of the SinusMax technology is very high start
frequency technology does not offer such extreme performance. Phoenix well
suited to power up difficult loads such as computers and low power electric
To transfer the load to
another AC source: the automatic transfer switch
For our lower power models we recommend the use of our Filax Automatic Filax
features a very short switchover time (less than 20 miliseconds) so that
computers and other electronic equipment will continue to operate without
Please see manual for a description.
Connector for remote on off switch available on all models.
Remote control panel (750VA model only)
Connects to the inverter with a RJ12 UTP cable (length 3 meter, included).
DIP switch for 50/60Hz selection (750VA model only)
DIP switches for
When operating in Power Saving Mode, the mode the inverter is switched off
in case of no load or very low load, and switches on every two seconds for a
short period. operate. If not, the inverter will shut down again. The on/off
level can be set from 15W to 85W with DIP switches.
Available with three different output sockets
top quality product with compact dimensions, light in weight and capable of
supplying power, start-up power.
Power Saving Mode (750VA model only)
no-load current is reduced to 1/3 of nominal. In this If the output current
exceeds a set lever. The inverter will continue to below.
Key Product Features: