 |
| Mitsubishi Heavy Industries Air
Heat Pump Model: FDCW100VNX
(3.5~12.0) kW
|
|
Mitsubishi Heavy Industries Air to Water Heat
Pump is a complete modern system for heating, cooling and producing hot
sanitary water for small houses, offering effective energy saving and reducing
carbon dioxide emission. Our product is safe and economical with integrated
hot water heater, immersion heater, circulating pump and climate system within
the indoor unit.
The heat energy is retrieved from the outdoor
air through an outdoor unit (FDCW100VNX), and is transferred to the indoor
unit (HM270V) by the medium of refrigerant circulated in closed piping system.
This eliminates the needs of bore holes and coils in the ground for
conventional systems.
Optimum annual operation costs
thanks to the inverter driven compressor. The speed of the compressor is
controlled according to the demand, and the industry’s highest COP level of
3.70 in heating operation has been achieved.
The compact size (600x650mm
footprint) has been achieved by integrating the hot water tank for sanitary
water together with the water heat exchanger in the indoor unit. Electric
wiring and piping works are simpler due to integrated indoor unit design.
Max temperature flow line is 65°C
with use of a large-capacity auxiliary electric heater as standard equipment
for back-up, so that the system will be able to cope with irregular and
excessive use of hot water. (58°C with only use of compressor). Various
sterilization temperature settings are available according to the requirements
of each country.
Key Product Feature's:
Model: FDCW100VNX
Nominal Heating - 9.0
(3.5~12.0) kW
Nominal Cooling -
8.0 (3.0~9.0) kW
COP Heating - 3.75
240Volt 1 phase (also available in 3phase)
Refrigerant R417A / R410A
Rated to -20DegC
Heating
Heating and cooling
Dimensions: L1760, W600, D650
Weight 214Kg ( indoor and outdoor)
|
Heating
|
|
|
Nominal Capacity (min~max)
|
9.0 (3.5~12.0) kW |
|
COP (Nominal) |
3.70 |
|
Tapping Capacity (Sanitary
hot water) in:15°C |
out:40°C |
270 liter 12 liter/min
200 liter 16 liter/min |
|
Tapping Capacity (Sanitary
hot water) in:15°C |
out:40°C |
|
Cooling |
|
|
Nominal Capacity (min~max)
|
8.0 (3.0~9.0)
|
|
COP (Nominal) |
2.87
|
|
Technical Data
|
|
|
Working range during heating with compressor
(ambient temperature) |
-20 - +43°C |
|
Working range during cooling (ambient
temperature) |
|
+15 - +43°C
|
|
Max temperature flow line
|
65°C |
|
Max temperature flow line, only use of
compressor |
|
58°C
|
|
Refrigerant quantity (R410A)
|
2.9 kg |
|
Max length, refrigerant pipe
|
|
12 m
|
|
Max height difference, refrigerant pipe
|
7 m
|
|
Dimensions, refrigerant
pipe
|
|
Gas pipe :
OD15.88 (5/8")
Liquid pipe :
OD9.52 (3/8") |
|
Pipe connections (outdoor to indoor) |
|
Flare |
|
HM270V (Indoor unit) |
|
|
Immersion heater |
Max 9 kW
|
|
Volume, total |
|
270 litre
|
5%+ - |
|
Volume, hot water coil |
14 litre
|
|
Height
|
|
1760 mm
(+20-50 mm,
adjustable feet) |
|
Width |
600 mm |
|
Depth |
|
650 mm
|
|
Weight (without water in tank)
|
140 kg
|
|
Electrical connections |
|
1Phase 230V /
3Phase 400V 50Hz |
|
FDCW100VNX (Outdoor unit)
|
|
|
Height |
845 mm |
|
Width |
|
970 mm
|
|
Depth |
370 mm (+80 mm
with foot rail) |
|
Weight |
|
74 kg
|
|
