Study of Air conditioning Heat-pump installation at Impulse Audio Music
Studio air conditioning (21/10/10)
Installation of Music Studio air conditioning heat-pumps:
air conditioning & refrigeration ltd were kindly asked to install of
a air conditioning heat-pump heating system for the Impulse Audio,
Millennium Studios, Thurleigh, Bedfordshire, United Kingdom. The Music
Studio recording area is around 11 meters/Squared of area that no
cooling facility installed at the state of the art recording
What air conditioning heat-pumps were installed in the Music Studio:
1 x LG
Air Conditioning UV30-NEC Ceiling / Floor Heat Pump (8.2 Kw / 30000 Btu)
Conditioning heat pump units
which provided enough heat for the music studio. Because the music
studio air conditioning was only required to heat we slightly undersized
the unit due to heat loads associated in the music recording area .
These units have a COP (3.64 initial input) which means that every 1000w
of electrical energy going in produces 3650 watts of heat. For more
information on heat-pump inverters please here.
Background of the Impulse Audio Music Studio Air Conditioning heat-pumps:
Audio music studio has over 15 years of experience providing the
highest standards of service to the event industry. Whether your event
is a private party for 50 people, or an arena event for 5000, Impulse
has the experience and resources to support your event to the very
highest standards. Impulse prides itself in finding innovative solutions
to technical requirements, providing you with new and exciting lighting
and sound solutions. We carefully balance our resources against our
requirements. This keeps our costs much lower making us very
competitive. Ask us for a quotation, you may be very impressed! The LG
heat-pump air conditioning systems provided a great value way of heating
within a short space of time and with little cost and also reduces CO2
Impulse Audio air conditioning Heat-pump efficiency and CO2 emissions:
Music Studio air conditioning heat-pump systems, took around 10 minutes
to heat fully but once warm the outdoor heat-pump inverter units slowed
down because the temperature had been reached therefore just
pumping small amounts of heat in to maintain heat. The 10msq area was
consuming 2 Amps/phase on 1phase 240V supply. This works out to be
around 0.08 GBP/hour.
Heat-pump installation criteria:
This Music Studio air conditioning heat-pump installation was undertaken by lead engineer Sean Handley with assistance from installation engineer Craig Fogarty. All pipe and services were installed on the outside of the building on standard wall clips. The music studio air conditioning units have a life span of around 15 to 25 years depending on their use. Installation time 1 day.
For a list of our client have a look at our About Us section
E-mail: [email protected]
Orion air conditioning and refrigeration limited is a United Kingdom based distributor of environmental products including air conditioning, heat pumps, electric space heaters, gas space heaters, oil space heaters, air exchange units, dehumidifiers and refrigeration equipment.
Residential, commercial and industrial heaters. Portable and fixed space heaters with something for everyone from the 500W to 100kw. We have one of the most extensive heater selections from patio heaters, fire places, propane heaters, oil filled radiators, fan heaters, oil heaters, gas heaters and infrared.
mounted air conditioning is the most popular type of air conditioning
system. Versatile and easy to install, most wall air conditioning units
have a filter which destroys funghi, collects duct in the air, bacteria
and viruses which provides healthy clean air for the occupants. Modern
wall air conditioning units have Innovative inverter
compressor designs and the ozone friendly R410A and R32
refrigerants combined with low noise air movement fan arrangement. The
result is a quiet, high performance cooling and heating system,
with advanced electronic controls for maximum comfort, controllable and
The Olympus Appliances JetHeat series of portable commercial / industrial electric fan heaters are designed for use in workshops, schools, warehouses, nurseries, showrooms, storage rooms, construction sites and containers. This series is made to a high standard and features a 3Kw / 240V and 9Kw / 415V, 15Kw / 415V and the largest 30Kw in 3 phase 415V format.
Designed to give the greatest possible safety, performance and reliability even in the most demanding industrial and commercial applications. Housed within the high-grade steel bodies and sickle bladed fans, designed to maximise airflow and pressure, which are driven by aluminium motors that keep weight to a minimum. Ideal for ventilation, extraction and fresh air supply as well as dust and fume extraction. Available in standard and explosion proof 110V and 240V~50Hz.
Projects And Tendering:
Orion air conditioning and refrigeration offer an UK installation, service and maintenance on Industrial, commercial refrigeration and air conditioning. Spare parts supply on Bitzer, Copeland, Prescold, Carrier, Carlyle, Dorin, Prescold, Frascold, Gram, Grasso, Hubbard, Maneurop, Trane and Sabroe.
Air conditioning and refrigeration spare parts from all the manufacturers including fan blades, thermistor probes, compressors, scroll compressor, Inverter compressor, swing compressor, Inverter Pcb, printed circuit boards, air filters, fan motors, thermisters, drain pumps, remote controls, expansion valve, condensor coil, solenoid valve, crankcase heater, electronic thermostat, float switch, magnetic contactor, capacitor, high pressure switch, low pressure switches and PCB's, PWB's.
Sales Installation and Service
UK: +44 (0)1234 841221
Last updated - 13/03/2019